Ironlak

GENERAL INFORMATION.

Ironlak | 400ml Interior/ Exterior Paint.



Ironlak has been developed with the artist’s needs in mind and was designed to offer the best coverage, alongside great control and a vibrant colour range of over 80 colours. Whilst primary attention was focused on producing a top quality line of paint, it was important that Ironlak products remained affordable for writers.

Ironlak performs extremely well in a variety of different climates, both hot and cold. Cans come fitted with the Ironlak Vegan Cap (outliner) and an additional two free Ironlak NY fat caps.

Ironlak 400ml cans were the fi rst cans made for aerosol art
in Australia. They’ve become world known for their coverage,
bright colours, crisp control and value for money. These cans
can be used for indoor and outdoor application and are made
from the highest quality raw materials. The fi nish is gloss and
the paint can be used for a variety of purposes and on all
surfaces. The paint formulation has been developed with the
user and environment in mind and contains less VOC’s than
its counterparts.



FEATURES.

• Highest coverage available
• Gloss fi nish
• Variable pressure
• Fast drying
• Good hardening
• Excellent fl exibility
• Strong adhesion
• Does not contain lead or any other heavy metals
• Easy to apply and repaint
• Good resistance to the elements
• High UV stability (refer to colour chart)

APPLICATIONS.

Ironlak can be used for a wide variety of applications and on
almost any surface. Because of its superior coverage it can be
easily applied to timber, concrete, steel and brick, its levelling
properties make it ideal for canvas and pottery.
• Aerosol Art
• Household / DIY
• Industrial
• Fine art
• Hobby and craft enthusiasts

FOR OPTIMAL USE.

• Shake the can vigorously for at least one full minute
once the ball begins to rattle, but two minutes for optimal
performance
• Apply on a clean, dry surface free from dirt and dust
• For best fi nish apply three light, even coats. However when
time does not permit, the colour will cover perfectly in one
thick coat.
• After use, turn the can upside down and depress the nozzle
until only propellant is sprayed from the can thereby clearing
the nozzle and valve.
• Use protective mask and gloves during use.
• Store in a cool, dry place away from direct sunlight.








PROPERTIES.

Pressure: Low and high pressure system.
Propellant: DME.
Resin: Modifi ed acrylic resin.
Colour: Refer to below colour chart.
Gloss Level: 70% gloss.
Dry time: Ten minutes touch dry.
Adhesion: 0 B.
Thickness of dry layer: 18 microns / layer.
Theoretical yield (painted continuously): 2.2 m² for 400 ml
aerosol.
Solvent: AVT Paints Solvent system (Refer to Ironlak MSDS for
further details - www.ironlak.com/msds).
Shelf Life: Two years from production date on the bottom of
the can.
Optimal Application Temperature: Minimum recommended
Temp is 5ºC, maximum temperature is 35ºC.